Raymond mill for mineral processing

[luckhoney]

In recent years, China has made great progress in the development of mineral resources and the comprehensive utilization of resources, which undoubtedly has brought huge development space for the mining machinery market. The most used in the powder processing industry in China is the grinding mill. The equipment that can be used by the majority of users in the market includes ultra-fine mills, Raymond mills, high-pressure suspension roller mills, etc. Among the most popular equipment is the Raymond mill.

Raymond mill is a commonly used milling equipment, capable of processing hundreds of materials, and the fineness of the powder is very uniform. The working capacity of this equipment is very strong, the fineness of the powder has been maintained between 80-325 mesh, the highest can reach about 400 mesh, users can adjust the fineness of the powder according to their needs. Another advantage of the Raymond mill is that the energy consumption of the equipment is very low compared to equipment with the same processing capacity, which saves a lot of costs for users.

Facing the increasingly fiercely competitive mining machinery market, we take the development of independent innovation capabilities as an important basis for the improvement of Raymond mill equipment. We believe that technological innovation is the only way for enterprise development. Only by continuously increasing product models and constantly upgrading manufacturers' new technologies can we meet market demand under the future social development and market demand, and meet the needs of national economic development.

The new generation of Raymond mill has a wide range of applications, good performance, and good quality. It is comprehensively developed with advanced technology and is widely used in mining, chemical, metallurgical and other industries.

1. The degree of wear of the grinding roller and ring of the Raymond mill: the grinding roller and the ring in the normal operation of the Raymond mill will not be in direct contact, but with the extension of use time, the roller and the ring The degree of wear has also increased correspondingly, which will result in insufficient grinding of the material, affect the fineness of the finished product, and increase the coarse particles.

2. The speed of the fan of the Raymond mill: the speed of the fan has a direct impact on the wind, the size of the wind will have an important impact on the material, when the wind is too strong, the lighter material will not meet the fineness requirements The powder will also be blown into the powder collector. On the contrary, the situation of low wind and heavy material will also affect the discharge.

3. The main engine speed of Raymond mill: Whether the size of the powder is suitable or not is determined by the speed of the main machine of the mill. If it is too high or too low, it will affect the particle shape. The speed of the host is controlled by the current of the motor.

4. Raymond mill analysis blades: When the degree of wear of the blades in the Raymond mill increases, the powder selection efficiency of the analyzer will be directly affected, and the coarse powder will pass through the analyzer and enter the powder collector , Which is also an important reason for excessive coarse powder.